TH Mining - 125 Series

Single Stage Standard Pump - Bare Shaft (According to Dimensional standard DIN EN 22 858 (DIN 24256 / ISO 2858) - Three-phase IV pole motor, 60Hz, 1750rpm - Flange nozzles according to ANSI B16.1, Suction 150mm x 125mm pressure.
Used for water with a slight presence of suspended solids, at temperatures up to 120°C (for higher temperatures, see options).
Maximum Flow: 497.6m³ / h - Minimum Flow: 57.1m³ / h;
Maximum Pressure: 86.1mca - Minimum Pressure: 9.0mca.

Brand
Thebe
Applications
Mining
Specifications
  • Casing in carbon steel WCB or ductile iron GGG50.
  • Impeller in stainless steel CA6NM.
  • Bearing support in cast iron CL 250.
  • Wear rings in carbon steel WCB or ductile iron GGG40.
  • Casing sealing O-ring in Viton.
  • Mechanical seal: silicon faces, AISI 304 stainless steel spring, and Viton elastomer (rubber).
  • Graphite-filled PTFE packing.
  • Technical Information
  • Options
  • Maximum Flow 497,6 m³/h
  • Maximum Pressure 86,1 mca
  • Minimum Flow 57,1 m³/h
  • Minimum Pressure 9,0 mca
    • Flanged nozzles according to DIN EN 1092-2/97 standard.
    • Supplied with counter flanges ANSI B16.1 or DIN EN 1092-2/97 with BSP or NPT threads.
    • Complete pump in stainless steel 304 or 316.
    • Complete pump in bronze.
    • Impeller in ductile iron (GGG50).
    • Impeller in stainless steel 304 or 316.
    • Impeller in bronze.
    • Impeller in WCB (carbon steel).
    • Special sealing of the mechanical seal / O-ring through EPDM elastomers (rubber) and tungsten faces.
    • Assembly with explosion-proof motor or mining line motor.
    • Assembly with bearing housing x base x flexible coupling.