TH Mining - 150 Series

Single Stage Standard Centrifugal Motor - Bare Shaft (According to Dimensional standard DIN EN 22 858 (DIN 24256 / ISO 2858) - Single-phase or three-phase motor in II Poles, 60Hz, 3500rpm or IV Poles, 60Hz, 1750rpm - Flange nozzles according to ANSI B16 standard .1, Suction 200mm x Pressure 150mm.
Used for water with a slight presence of suspended solids, at temperatures up to 120°C (higher temperatures, see options).
Maximum Flow: 665.6m³ / h - Minimum Flow: 128,6m³ / h;
Maximum Pressure: 123.2mca - Minimum Pressure: 9.0mca.

Note: TH-150/500 model – Bearing housing designed according to a complementary dimensional standard to DIN EN 22 858.
It features a double volute that minimizes radial loads through hydraulic balancing within the casing, reducing vibration and shaft deflection, thereby extending the service life of its components.
Optional suction Flow Inducer available to reduce the required NPSH.

Brand
Thebe
Applications
Mining
Specifications
  • Casing in carbon steel WCB or ductile iron GGG50.
  • Impeller in stainless steel CA6NM.
  • Bearing support in cast iron CL 250.
  • Wear rings in carbon steel WCB or ductile iron GGG40.
  • Casing sealing O-ring in Viton.
  • Mechanical seal: silicon faces, AISI 304 stainless steel spring, and Viton elastomer (rubber). Models THM-150/315, THM-150/400, and THM-150/500 available upon request.
  • Graphite-filled PTFE packing.
  • Technical Information
  • Options
  • Maximum Flow 665,6 m³/h
  • Maximum Pressure 123,2 mca
  • Minimum Flow 128,6 m³/h
  • Minimum Pressure 9,0 mca
    • Flanged nozzles according to DIN EN 1092-2/97 standard.
    • Supplied with counter flanges ANSI B16.1 or DIN EN 1092-2/97 with BSP or NPT threads.
    • Complete pump in stainless steel 304 or 316.
    • Complete pump in bronze.
    • Impeller in ductile iron (GGG50).
    • Impeller in stainless steel 304 or 316.
    • Impeller in bronze.
    • Impeller in WCB (carbon steel).
    • Special sealing of the mechanical seal / O-ring through EPDM elastomers (rubber) and tungsten faces.
    • Assembly with explosion-proof motor or mining line motor.
    • Assembly with bearing housing x base x flexible coupling.
    • Flow Inductor - Model TH-150/500.