TH Mining - 200 Series

Single Stage Standard Centrifugal Motor - Bare Shaft (According to Dimensional standard DIN EN 22 858 (DIN 24256 / ISO 2858) - Single-phase or three-phase motor in II Poles, 60Hz, 3500rpm or IV Poles, 60Hz, 1750rpm - Flange nozzles according to ANSI B16 standard .1, Suction 250mm x Settle 200mm.
Used for water with a slight presence of suspended solids, at temperatures up to 120°C (higher temperatures, see options).
Maximum Flow: 1060.8m³ / h - Minimum Flow: 247.0m³ / h;
Maximum Pressure: 79.1mca - Minimum Pressure: 14.0mca.

Brand
Thebe
Applications
Mining
Specifications
  • Casing in carbon steel WCB or ductile iron GGG50.
  • Impeller in stainless steel CA6NM.
  • Bearing support in cast iron CL 250.
  • Wear rings in carbon steel WCB or ductile iron GGG40.
  • Casing sealing O-ring in Viton.
  • Mechanical seal: upon request.
  • Graphite-filled PTFE packing.
  • Technical Information
  • Options
  • Maximum Flow 1060,8 m³/h
  • Maximum Pressure 79,1 mca
  • Minimum Flow 247,0 m³/h
  • Minimum Pressure 14,0 mca
    • Flanged nozzles according to DIN EN 1092-2/97 standard.
    • Supplied with counter flanges ANSI B16.1 or DIN EN 1092-2/97 with BSP or NPT threads.
    • Complete pump in stainless steel 304 or 316.
    • Complete pump in bronze.• Impeller in ductile iron (GGG50).
    • Impeller in stainless steel 304 or 316.
    • Impeller in bronze.
    • Impeller in WCB (carbon steel).
    • Special sealing of the mechanical seal / O-ring through EPDM elastomers (rubber) and tungsten faces.
    • Assembly with explosion-proof motor or mining line motor.
    • Assembly with bearing housing x base x flexible coupling.