AE-3

Self-priming Single-Stage Centrifugal Motor Pump - Monobloc or Bare Shaft with semi-open Impeller - Single-phase or three-phase II Poles, 60Hz, 3500rpm motor - Nozzles with BSP thread Suction 3" "x Pressure 3" ". Used for water with non-fibrous solids with a maximum diameter of 5mm and a proportion of up to 20% of the volume. Maximum Flow: 84.0m³ / h - Minimum Flow: 2.0m³ / h; Maximum Pressure: 51.0mca - Minimum Pressure: 5.0mca.

Brand
Thebe
Applications
Combustion Motor Coupling
Coupling availability on petrol / diesel engines in monoblock version.
Agriculture / Irrigation
Use in irrigation, water transfer to reservoirs, farms, farms, drinking fountains.
Non fiber solids water
Pumping of wastewater with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Slurry
Pumping of liquid to reservoir or irrigation with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Construction
Use in construction / building in general.
Sewer
Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Housing
Supply of reservoirs / water tanks, cisterns, pressurization of gardens.
Sanitation
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).
Specifications


• GG-25 cast iron discharge Casing.
• GG-25 cast iron suction Casing.
• GG-25 cast iron separator plate.
• GG cast iron Impellers -25.
• Loose flange in cast iron GG-25.
• Intermediate in cast iron GG-20.
• Sealing O'ring rings in Buna N.
• Mechanical seal: Graphite and ceramic faces.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.


> >

  • Technical Information
  • Options
  • Documentation
  • Drawings
  • Minimum Pressure 5,0 mca
  • Minimum Flow 2,0 m³/h
  • Maximum Flow 84,0 m³/h
  • Maximum Pressure 51,0 mca


  • • Flange nozzles according to ANSI B16.1.
    • Whole pump in Nodular Iron (GGG-40).
    • Whole pump in AISI 304 Stainless Steel or AISI 316.
    • Whole Pump in Bronze.
    • Whole pump in WCB (Carbon Steel).
    • Nodular Iron impeller (GGG-40).
    • Stainless impeller (AISI 304 / AISI 316).
    • Rotor in Bronze.
    • Rotor WCB (Carbon Steel).
    • Special seal of the Mechanical Seal / O'ring Ring / valve gasket through elastomers (rubbers) in Viton or EPDM and "faces" in Silicon or Tungsten Carbide.
    • Gasket sealing.
    • NPT standard nozzles.
    • Direct mounting on 3600rpm combustion engines (diesel / gasoline).
    • Assembly with explosion-proof motor.
    • Bearing assembly x Base x Elastic sleeve.
  • Curves AE-3 Semi Open Impeller Download
  • Installation, Operation and Maintenance Manual - Surface Products 60Hz Download
  • Parts List - AE-3 Motor IP-55 - Parts from May 2018 Download
  • Parts List - AE-3 Motor IP-55 - Parts until April 2018 Download
  • Parts List - Bare Shaft AE-3 Download
  • THEBE Warranty Term Download