B-12

Single-stage Centrifugal Pump - Monobloc or Bare Shaft - Single-phase or three-phase II II Pole, 60Hz, 3500rpm motor - Nozzles with BSP thread, 3/4" "suction x 3/4" pressure. Used for clean water. Maximum Flow: 6.7m³ / h - Minimum Flow: 0.1m³ / h; Maximum Pressure: 26.5mca - Minimum Pressure: 4.0mca. OBS .: B-12 - Assembly of the pump casing directly on the motor flange (without intermediary); BA-12 - Assembly with an intermediary between the pump casing and the motor.

Brand
Thebe
Applications
Agriculture / Irrigation
Use in irrigation, water transfer to reservoirs, farms, farms, drinking fountains.
Non fiber solids water
Pumping of wastewater with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Construction
Use in construction / building in general.
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Housing
Supply of reservoirs / water tanks, cisterns, pressurization of gardens.
Specifications


• Pump casing in GG-20 cast iron.
• "B-12 - Impeller closed in thermoplastic.
• Semi-open Impeller in aluminum".
• BA-12 - Impeller in aluminum and intermediate in cast iron GG-20.
• O-ring for sealing the Casing in Buna N.
• Mechanical seal: Graphite and ceramic faces.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.


  • Technical Information
  • Options
  • Documentation
  • Drawings
  • Maximum Flow 3,0 m³/h
  • Maximum Pressure 89,0 mca
  • Minimum Flow 128,6 m³/h
  • Minimum Pressure 69,0 mca

  •  

    • Special assembly with semi-open centrifugal rotor.
    • Nodular Iron Housing / Intermediate (GGG-40).
    • Entire Pump in Bronze.
    • Bronze rotor.
    • NPT standard threaded nozzles.
    • Special sealing of the Mechanical Seal / O'ring Ring through elastomers (rubbers) in Viton or EPDM and "faces" in Silicon or Tungsten Carbide.
    • Mounting with explosion-proof motor.
    • Mounting bearing x Base x Elastic sleeve.
    • Use as a pressurization system (T-Press) if installed next to the TPC-58 pressurizer.