BST
•Crushing device made of
high hardness, which reduces solids and fibers to smaller sizes
reduced, eliminating the risk of clogging and
thus enabling uninterrupted bombardment.
•Discharge connection: 50 ~ 80 mm
•Engine power: 1 ~ 10hp
•Flow: 6~100m³/h
•Gauge height: 2.5 ~ 41m
•Rotor: Semi-open
•Shaft seal: Mechanical seal
•Type: Submersible, single-phase, three-phase, dry chamber
•Protection index: IP-68
•Insulation class: F
•Nominal speed: 3,450 rpm (2 poles)
•Stator voltage: 220 and 380V
•Start type: Direct/Inverter
•Number of phases: 1 and 3
•Bearings: Bearings
•Electrical cable: Length 8 m
•Maximum temperature: 40 °C
•Maximum submergence: 5 m
•Number of departures per hour: 20
 

"The pumps are designed to shred non-fibrous materials, such as gloves, condoms, cloths, diapers, food waste, etc. Fibrous materials such as stones, wood and polymers are not recommended for these products, they can cause serious damage to the equipment."

Brand
Ebara
Applications
Public water supply
Pressurization of public water distribution networks.
Construction
Use in construction / building in general.
Drainage of Wastewater and Rainwater
Depletion of reservoirs, wells, basements, floods.
Sewer
Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).
Housing
Supply of reservoirs / water tanks, cisterns, pressurization of gardens.
Sanitation
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).
Specifications
•Volute: Cast iron.
•Rotor: High chrome.
•Shaft: AISI 420 stainless steel.
•Motor housing: Cast iron.
•Nuts and screws: Stainless steel.
•Retainer shaft seal:
      Upper: Silicon x Graphite.
      Bottom: Ceramic x Graphite.