Access ANTENNA SHOP
VIRTUAL
DG
Sturdy construction, made of gray cast iron and designed for heavy duty. It has a shredder device made of high hardness material that reduces solids and fibers to small sizes, eliminating the risk of clogging and thus enabling pumping without interruption.
• Discharge connection: 32 ~ 50 mm
• Motor power: 3 ~ 7.5 hp
• Impeller: Semi-open, semi-vortex recoil
• Milling system: Crusher Impeller with fixed cutting ring
• Shaft seal: Double mechanical seal, lubricated oil
• Type: Submersible, dry chamber
• Protection index: IP-68
• Insulation class: F
• Nominal speed: 3,500 rpm (2 poles)
• Stator voltage: Single phase: 220 V - Three phase: 220/440 V
• Start type: Direct
• Number of phases: Single-phase / Three-phase
• Internal protection: Thermal protector
• Service factor: 1.15
• Electric cable: Length 10 m (others on request)
• Maximum temperature: 40 ºC
• Maximum submergence: 8 m
• Number of starts per hour: 20.
• Flow rate: 1.0 ~ 29 m³ / h
• Manometric height: 18 ~ 40 m
• Discharge connection: 32 ~ 50 mm
• Motor power: 3 ~ 7.5 hp
• Impeller: Semi-open, semi-vortex recoil
• Milling system: Crusher Impeller with fixed cutting ring
• Shaft seal: Double mechanical seal, lubricated oil
• Type: Submersible, dry chamber
• Protection index: IP-68
• Insulation class: F
• Nominal speed: 3,500 rpm (2 poles)
• Stator voltage: Single phase: 220 V - Three phase: 220/440 V
• Start type: Direct
• Number of phases: Single-phase / Three-phase
• Internal protection: Thermal protector
• Service factor: 1.15
• Electric cable: Length 10 m (others on request)
• Maximum temperature: 40 ºC
• Maximum submergence: 8 m
• Number of starts per hour: 20.
• Flow rate: 1.0 ~ 29 m³ / h
• Manometric height: 18 ~ 40 m
Brand
Ebara
Applications
Drainage of Wastewater and Rainwater
Depletion of reservoirs, wells, basements, floods.
Sanitation
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).
Specifications
• Volute: Cast Iron.
• Impeller: Cast Iron.
• Crusher Impeller: High chrome cast iron.
• Cutter ring: High chrome cast iron.
• Shaft: AISI 403 stainless steel.
• motor Casing: Cast iron.
• Nuts and bolts: AISI 304 stainless steel.
• Mechanical seals: Upper: ceramic x graphite - Lower: silicon carbide x silicon carbide.
• Bare Shafts: Pre-lubricated armored ball Bare Shafts.
