TSL-40-160/2

Multi-stage Centrifugal Pump - Monobloc or Bare Shaft with two semi-open Impellers in back-to-back configuration for high pressures - Single-phase or three-phase II Poles motor, 60Hz, 3500rpm - Flange nozzles according to ANSI B16.1 standard (with flange for BSP thread flange) ), Suction 2.1 / 2 "" x Settlement 1.1 / 2 "". Used for water with non-fibrous solids with a maximum diameter of 18mm and a proportion of up to 20% of the volume. Maximum Flow: 92.4m³ / h - Minimum Flow: 4.9m³ / h; Maximum Pressure: 126.3mca - Minimum Pressure: 40.0mca.

Brand
Thebe
Applications
Agriculture / Irrigation
Use in irrigation, water transfer to reservoirs, farms, farms, drinking fountains.
Non fiber solids water
Pumping of wastewater with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Slurry
Pumping of liquid to reservoir or irrigation with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Construction
Use in construction / building in general.
Sewer
Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Sanitation
Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).
Specifications


• Cast iron Casing GG-25.
• Impeller in cast iron GG-25.
• Intermediate cast iron GG-20.
• O-ring for sealing the casing in Buna N.
• Mechanical seal: Graphite and ceramic faces.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.


>

  • Technical Information
  • Options
  • Documentation
  • Drawings
  • Minimum Pressure 40,0 mca
  • Maximum Flow 92,4 m³/h
  • Maximum Pressure 126,3 mca
  • Minimum Flow 4,9 m³/h

  • • Whole Nodular Iron Pump (GGG-40).
    • Entire Bronze Pump.
    • Nodular Iron Impeller (GGG-40 ).
    • Bronze rotor.
    • Stainless steel rotor (AISI 304 / AISI 316).
    • WCB rotor (carbon steel).
    • Special sealing of the Mechanical Seal / O'ring Ring through elastomers (rubbers) in Viton or EPDM and "faces" "in Silicon or Tungsten Carbide.
    • Mounting bearing with base, multiplier and cardan for tractor.
    • Assembly with explosion-proof motor.
    • Bearing assembly x Base x Elastic sleeve.