Ebara

TSL-50-250/2

Multi-stage Centrifugal Pump - Bare Shaft with two semi-open Impellers in back-to-back configuration for high pressures - Single-phase or three-phase II Poles motor, 60Hz, 3500rpm or IV Poles, 60Hz, 1750rpm - Flange nozzles according to ANSI B16.1 standard (with flange for BSP thread flange) ), Suction 3" x Settlement 2.1 / 2". Used for water with non-fibrous solids with a maximum diameter of 13mm and a proportion of up to 20% of the volume. Maximum Flow: 157.6m³ / h - Minimum Flow: 18.4m³ / h; Maximum Pressure: 245.0mca - Minimum Pressure: 12.0mca.

Brand

Thebe

Applications

Agriculture / Irrigation

Use in irrigation, water transfer to reservoirs, farms, farms, drinking fountains.

Non fiber solids water

Pumping of wastewater with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.

Slurry

Pumping of liquid to reservoir or irrigation with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.

Construction

Use in construction / building in general.

Sewer

Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).

Industries / Processes

Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.

Sanitation

Pumping water from the sanitation process (check compatibility of materials, diameter of solids and proportion of the model).

Specifications

• Cast iron Casing GG-25.
• Cast iron suction Casing GG-25
• Cast iron separator plate GG-25.
• Impeller in cast iron GG-25.
• Loose flange in cast iron GG-25.
• Intermediate cast iron GG-20.
• O-ring for sealing the casing in Buna N.
• Mechanical seal: Graphite and ceramic faces.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.
• Graflex gasket