Portable Submersible Centrifugal Pump - Vortex type semi-open impeller - Built-in Float Automatic - Single-phase motor IP-68 of 0.33hp with thermal protector in II Poles, 60Hz, 3500rpm - Nozzle with thread BSP 1.1 / 4" ". Used for water with solids with a maximum diameter of 20mm and a proportion of up to 20% of the volume and maximum temperature of 50ºC. Maximum Flow: 10.2m³ / h - Minimum Flow: 1.2m³ / h; Maximum Pressure: 5.5mca - Minimum Pressure: 1.3mca. NOTE: Free of oil in the motor, the cooling is performed by the pumped water itself. Maximum submergence of 5.0m.

Drainage of Wastewater and Rainwater
Depletion of reservoirs, wells, basements, floods.
Pressurization for displacement / drainage of sewage (check diameter of solids and proportion suitable for the model).
Water tank cleaning
Exhaustion of water tanks for easy and quick cleaning.
Supply of reservoirs / water tanks, cisterns, pressurization of gardens.

• 304 stainless steel Casing.
• Suction grid in 304 stainless steel.
• Impeller in 304 stainless steel.
• Sealing rings in Buna N.
• Mechanical seal: Faces in graphite and ceramic.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.

  • Technical Information
  • Options
  • Documentation
  • Minimum Flow 1,2 m³/h
  • Maximum Flow 10,2 m³/h
  • Maximum Pressure 5,5 mca
  • Minimum Pressure 1,3 mca

  • • SUCCESS KIT - Allows the liquid to be sucked up to 3mm from the ground.
    • Special seal of the Mechanical Seal / O'ring Ring through elastomers (rubbers) in Viton or EPDM and "faces" in Silicon Carbide or Tungsten.