TH-16

Single-stage Centrifugal Pump - Monobloc or Bare Shaft - Single-phase or three-phase II II Poles, 60Hz, 3500rpm motor - Nozzles with BSP thread, Suction 1.1 / 2" "x Pressure 1" ". Used for clean water. Maximum Flow: 16.5m³ / h - Minimum Flow: 1.0m³ / h; Maximum Pressure: 47.0mca - Minimum Pressure: 5.0mca. NOTE: TH-16 - Assembly of the pump case directly on the motor flange (without intermediary); THA-16 - Assembly with an intermediary between the pump case and the motor.

 

 

Brand
Thebe
Applications
Combustion Motor Coupling
Coupling availability on petrol / diesel engines in monoblock version.
Agriculture / Irrigation
Use in irrigation, water transfer to reservoirs, farms, farms, drinking fountains.
Non fiber solids water
Pumping of wastewater with non-fibrous suspended solids with diameters and maximum proportion compatible with the model through the specification described by the manufacturer in the product selection table.
Construction
Use in construction / building in general.
Industries / Processes
Circulation, Filtration, Operating Machines, Utilities, Induction Furnaces, Painting Booth.
Housing
Supply of reservoirs / water tanks, cisterns, pressurization of gardens.
Specifications


• Cast iron pump Casing GG-20.
• TH-16 - Thermoplastic closed impeller.
• Semi-open impeller in GG-20 cast iron.
• THA-16 - Closed impeller in aluminum.
• Semi-open impeller in GG-20 cast iron.
• Intermediate in GG-20 cast iron.
• O-ring for sealing the Buna N Casing.

• Mechanical seal: Graphite and ceramic faces.
• Spring in 304 stainless steel and elastomer (rubber) in Buna N.


> >

  • Technical Information
  • Options
  • Documentation
  • Drawings
  • Minimum Flow 1,0 m³/h
  • Minimum Pressure 5,0 mca
  • Maximum Pressure 47,0 mca
  • Maximum Flow 18,4 m³/h


  • • Special assembly with semi-open centrifugal rotor.
    • Nodular Iron Housing (GGG-40).
    • Whole Pump in Bronze.
    • Rotor in Bronze.
    • Special seal of the Mechanical Seal / O'ring ring through elastomers (rubbers) in Viton or EPDM and "faces" in Silicon Carbide or Tungsten.
    • NPT standard threaded nozzles.
    • Direct mounting on 3600rpm combustion engines (diesel / gasoline).
    • Use as a pressurization system (T-Press) if installed next to the TPC-58 pressurizer.
    • THE-16 - Nozzles with BSP thread, 1 "x Suction 1" suction.